1. Use a lint roller to remove any lint on the t-shirt’s press area.

2. Pre-press the garment for 5-7 seconds to remove moisture.

3. Place the design on the garment and press according to “Press Settings” below. You may need to do a few test prints to find the optimal press settings for your specific equipment and environment.

4. HOT PEEL OR COLD PEEL?

     a. FOR HOT PEEL: DO NOT ALLOW TO GET COLD. After pressing, wait 5-10 seconds, then peel the film from one corner in one consistent motion.

     b. FOR COLD PEEL: WAIT UNTIL THE TRANSFER IS COOL TO THE TOUCH, then peel.

5. Post-press the garment for 5 seconds.

*NOTE: When pressing, using a teflon sheet between the press and the design produces the best results